Haku
Viitteet 1-10 / 10
Safety of the Computer Network
(Saimaan ammattikorkeakoulu, 2009)
The purpose of the work was to develop recommendations, and guide of actions to support the necessary safety level of a computer network.
The tasks were:
- The analysis of the literature and informational sources devoted ...
Additive manufacturing as a mean of rapid prototyping: from words to the actual model
(Saimaan ammattikorkeakoulu, 2015)
The purpose of the study was to get a deeper knowledge of additive manufacturing, its techniques, benefits, trends and challenges, and to create a better commercial prototype of a gearbox and give clear guidelines how to ...
Advanced welding technologies used in aerospace industry
(Saimaan ammattikorkeakoulu, 2018)
The purpose of the research is comparison of welding processes for the aerospace industry and identification of optimal welding technologies used in the recent decades. The research was conducted by a critical review of ...
Theory of Robotics Arm Control with PLC
(Saimaan ammattikorkeakoulu, 2015)
This thesis was commissioned for Saimaa University of Applied Sciences with the aim of understanding the control system for a robotic arm. The Robotic Arm in this case was from Saimaa University of Applied Sciences.
The ...
Concrete casting moulds with 3D-printing technology
(Saimaan ammattikorkeakoulu, 2019)
This thesis aims to test the feasibility of adopting 3D printing technology in concrete moulds manufacturing and formulate the advantages and limitations of 3D printing technology in casting mould making.
This study was ...
Semi-Automated Turning Simulation Production Using Catia V5
(Saimaan ammattikorkeakoulu, 2015)
The purpose of this thesis was to explore the possibility of using CAPP within a CAD/CAM program with an end goal of producing turning simulations for simple geometries. The system requires only simple geometrical input ...
Detonation thermal spraying process of metal-ceramic coating of the inner body of a regulating valve for maintenance of turbine condensate level in a deaerator for a nuclear power plant
(Saimaan ammattikorkeakoulu, 2015)
The objective of the research was to examine a process of metal ceramic detonation spraying, technology and realization of the procedure and its features for the given component.
The work was commissioned by main process ...
Computer Program Development for House Cost Calculation
(Saimaan ammattikorkeakoulu, 2010)
The main purpose of this project was to develop a program, which can calculate the cost of houses. This program should accelerate a matching process between a company and users. Also the program should contain a database ...
Implementing an Automated Sorting System
(Saimaan ammattikorkeakoulu, 2015)
The study was commissioned by Timo Eloranta, Faculty at Saimaa University of Applied Sciences. The thesis was approved by the programme manager Jukka Nisonen. The purpose of this project was to create a simulated and ...
Four axis hot-wire foam cutter controlled by Mindstorms EV3
(Saimaan ammattikorkeakoulu, 2017)
The purpose of the study was to develop a 4-axis numerically controlled hot-wire foam cutter suitable for flying aircraft modelling purposes. Numerically controlled foam cutter had to be able to cut intricate shapes out ...