1-vaiheinen pikajälleenkytkentä Siemens 7VK87-jälleenkytkentäreleellä 400 kV Duplex-kiskojärjestelmässä
Kytölehto, Roope (2022)
Kytölehto, Roope
2022
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-202204145244
https://urn.fi/URN:NBN:fi:amk-202204145244
Tiivistelmä
Opinnäytetyön tavoitteena oli toteuttaa 1-vaiheinen pikajälleenkytkentä Siemens
7VK87-jälleenkytkentäreleellä 400 kV Duplex-kiskojärjestelmässä. Tarkoituksena oli myös toteuttaa vakioratkaisut käytettäville I/O-signaaleille, testiohjelmalle ja
tarvittaville dokumenteille 1-vaiheiseen pikajälleenkytkentään. Työn toimeksiantajana toimii Fingrid Oyj.
Työssä perehdytään sähkönsiirtoverkkojen rakenteeseen, yleisimpiin vikatilanteisiin, 400 kV johtosuojaukseen ja jälleenkytkentöihin. Työ aloitettiin suunnittelulla 3-vaiheisen pikajälleenkytkentätoteutuksen ja aikaisempien 1-vaihe toteutuksien
pohjalta. Toiminnan testaamista varten muodostettiin testikytkentä koestuslaitteella ja katkaisijasimulaattorilla.
Tavoitteet saavutettiin onnistuneesti ja tavoitteet helpottavat tulevia hankkeita.
Opinnäytetyöllä määritettiin yksiselitteiset ratkaisut toteutuksille, joilla vähennetään työmäärää muiden valmistajien laitteiden toteutuksissa ja helpotetaan laadunvarmistusta projekteissa. The purpose of the thesis was to implement a 1-phase high speed automatic reclosing with a Siemens 7VK87 autoreclosing relay in a 400 kV double bus double breaker system. The intention was also to implement standard solutions for the
relays I/O signals, the test program and the necessary documents for 1-phase high speed automatic reclosing. The thesis was commissioned by Fingrid Oyj.
The thesis deals with the structure of power transmission networks, the most common fault locations, 400 kV line protection and autoreclosings. The thesis began with design based on the implementation of a 3-phase high speed automatic reclosing and previous 1-phase autoreclosing implementations. A test circuit was made with a relay tester and a circuit breaker simulator for functional testing.
The aims were successfully achieved, which will facilitate future projects. The thesis defined unambiguous solutions for the implementation, which reduce the
workload in the implementations of equipment from other manufacturers and facilitate quality assurance in projects.
7VK87-jälleenkytkentäreleellä 400 kV Duplex-kiskojärjestelmässä. Tarkoituksena oli myös toteuttaa vakioratkaisut käytettäville I/O-signaaleille, testiohjelmalle ja
tarvittaville dokumenteille 1-vaiheiseen pikajälleenkytkentään. Työn toimeksiantajana toimii Fingrid Oyj.
Työssä perehdytään sähkönsiirtoverkkojen rakenteeseen, yleisimpiin vikatilanteisiin, 400 kV johtosuojaukseen ja jälleenkytkentöihin. Työ aloitettiin suunnittelulla 3-vaiheisen pikajälleenkytkentätoteutuksen ja aikaisempien 1-vaihe toteutuksien
pohjalta. Toiminnan testaamista varten muodostettiin testikytkentä koestuslaitteella ja katkaisijasimulaattorilla.
Tavoitteet saavutettiin onnistuneesti ja tavoitteet helpottavat tulevia hankkeita.
Opinnäytetyöllä määritettiin yksiselitteiset ratkaisut toteutuksille, joilla vähennetään työmäärää muiden valmistajien laitteiden toteutuksissa ja helpotetaan laadunvarmistusta projekteissa.
relays I/O signals, the test program and the necessary documents for 1-phase high speed automatic reclosing. The thesis was commissioned by Fingrid Oyj.
The thesis deals with the structure of power transmission networks, the most common fault locations, 400 kV line protection and autoreclosings. The thesis began with design based on the implementation of a 3-phase high speed automatic reclosing and previous 1-phase autoreclosing implementations. A test circuit was made with a relay tester and a circuit breaker simulator for functional testing.
The aims were successfully achieved, which will facilitate future projects. The thesis defined unambiguous solutions for the implementation, which reduce the
workload in the implementations of equipment from other manufacturers and facilitate quality assurance in projects.