Huonemerkkivalomoduulin suunnittelu
Alander, Elis (2024)
Alander, Elis
2024
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-202403275293
https://urn.fi/URN:NBN:fi:amk-202403275293
Tiivistelmä
Opinnäytetyössä suunniteltiin ja valmistettiin prototyyppi huonemerkkivalomoduulista Everon Oy:lle. Huonemerkkivalomoduuli on sähköasennuskotelosta, läpinäkyvästä kuvusta ja elektroniikkakomponenteista koostuva tuote, jonka avulla indikoidaan hälytyskutsuja. Se toimii osana hoitajakutsujärjestelmää erilaisissa hoitoympäristöissä. Referenssinä työlle toimi Everon Oy:n vanha tuote, jonka pohjalta prototyyppi uudesta tuotteesta suunniteltiin ja valmistettiin.
Uuden tuotteen suunnittelulla tavoiteltiin tiettyjen ominaisuuksien parantamista. Lisäksi ainetta lisäävää valmistusta havainnointiin menetelmänä valmistaa osa moduulin kuuluvista osista ja taata näiden yhteensopivuus muiden komponenttien kanssa. Havainnointi toteutettiin 3D-tulostamalla prototyyppejä kahdesta uudesta, moduuliin suunnitellusta osasta. Opinnäytetyössä käytettiin avuksi tietokoneavusteista suunnittelua, jonka kautta saatiin tarvittavat tiedostot valmistettavia osia varten.
Tuloksena työstä syntyi valmis prototyyppi moduulista, joka täyttää halutut vaatimukset. Parhaassa tapauksessa prototyyppiä voidaan käyttää lähes sellaisenaan kuin se on opinnäytetyössä suunniteltu. Prototyyppi auttaa huomaamaan kehityskohteita ja sen rakenne suunniteltiin mahdollistamaan muutoksia tulevaisuudessa. The thesis involved designing and manufacturing of a prototype of a room indicator light module for Everon Oy. The room indicator light module is a product consisting of an electrical installation box, a transparent cover, and electronic components that are used to indicate alarm calls. It functions as part of a nurse call system in various healthcare environments. The old product by Everon Oy served as a reference for the project, upon which the prototype of the new product was designed and manufactured.
The design of the new product aimed to improve certain features. Additionally, additive manufacturing was utilized as a method of observation to manufacture parts of the module and ensure compatibility with other components. Observation was carried out by 3D printing prototypes of two new parts designed for the module. Computer-aided design was used to generate the necessary files for the manufacture of these parts.
The result of the project was a complete prototype of the module that meets the desired requirements. Ideally, the prototype can be used almost as it was designed in the thesis project. The prototype helps identify areas for improvement, and its structure was designed to allow for changes in the future.
Uuden tuotteen suunnittelulla tavoiteltiin tiettyjen ominaisuuksien parantamista. Lisäksi ainetta lisäävää valmistusta havainnointiin menetelmänä valmistaa osa moduulin kuuluvista osista ja taata näiden yhteensopivuus muiden komponenttien kanssa. Havainnointi toteutettiin 3D-tulostamalla prototyyppejä kahdesta uudesta, moduuliin suunnitellusta osasta. Opinnäytetyössä käytettiin avuksi tietokoneavusteista suunnittelua, jonka kautta saatiin tarvittavat tiedostot valmistettavia osia varten.
Tuloksena työstä syntyi valmis prototyyppi moduulista, joka täyttää halutut vaatimukset. Parhaassa tapauksessa prototyyppiä voidaan käyttää lähes sellaisenaan kuin se on opinnäytetyössä suunniteltu. Prototyyppi auttaa huomaamaan kehityskohteita ja sen rakenne suunniteltiin mahdollistamaan muutoksia tulevaisuudessa.
The design of the new product aimed to improve certain features. Additionally, additive manufacturing was utilized as a method of observation to manufacture parts of the module and ensure compatibility with other components. Observation was carried out by 3D printing prototypes of two new parts designed for the module. Computer-aided design was used to generate the necessary files for the manufacture of these parts.
The result of the project was a complete prototype of the module that meets the desired requirements. Ideally, the prototype can be used almost as it was designed in the thesis project. The prototype helps identify areas for improvement, and its structure was designed to allow for changes in the future.