Suunnitteluohjelmien CadMatic ja SolidWorks käytettävyyden vertailu laivasuunnittelussa
Elsilä, Nelli (2021)
Elsilä, Nelli
2021
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2021052510975
https://urn.fi/URN:NBN:fi:amk-2021052510975
Tiivistelmä
Tämän opinnäytetyön tarkoituksena oli vertailla kahden suunnitteluohjelman käytettävyyttä laivanrakennussuunnittelussa. Vertailtavat suunnitteluohjelmat olivat CadMatic ja SolidWorks. Vertailun tarkoituksena oli nähdä voiko SolidWorks ohjelman käyttöä lisätä yrityksen suunnittelutyössä ja helpottaako tai vähentääkö sen käyttö työvaiheita.
Työssä tarkastellaan SolidWorks ohjelman työvaiheita, ja vertaillaan niitä CadMatic ohjelman työvaiheisiin. Opinnäytetyö on toteutettu pitämällä yrityksen henkilöstön kanssa palavereja ja kokemuksiin perustuvia haastatteluja koskien CadMaticin käyttöä sekä mallintamalla SolidWorks ohjelmalla kappaleet, jotka olivat valmiiksi mallinnettu jo
CadMatic ohjelmalla.
Tuloksena toteutui SolidWorksilla mallinnetut kappaleet, joita vertailtiin CadMatic ohjelmalla mallinnettuihin kappaleisiin. Kappaleiden työvaiheita ja niihin kuluvaa aikaa vertailtiin keskenään. Tuloksena saatiin tiivis raportti arvioinneista, joista käy ilmi, että SolidWorksin käytön lisääminen yrityksessä olisi mahdollista sekä kannattavaa sillä se helpottaa tietyissä tilanteissa mallintamista. The purpose of this thesis was to compare the usability of two design programs in shipbuilding design. The design programs to be compared were CadMatic and SolidWorks. The purpose of the comparison was to see if SolidWorks could be used to increase the use of the program in the company's design work and whether its use facilitates or reduces work steps.
The thesis examines the work steps of SolidWorks program and compares them with the steps of the CadMatic program. The thesis has been carried out by holding meetings with the company's personnel and interviews based on experience regarding the use of CadMatic and modelling pieces that were already modelled with CadMatic software with SolidWorks.
The result was SolidWorks modelled pieces, which were compared to pieces modelled on CadMatic. The work phases of the paragraphs and the time it takes to do so were compared. The result was a concise report of evaluations showing that increasing the use of SolidWorks in the company would be possible and profitable as it facilitates modelling in certain situations.
Työssä tarkastellaan SolidWorks ohjelman työvaiheita, ja vertaillaan niitä CadMatic ohjelman työvaiheisiin. Opinnäytetyö on toteutettu pitämällä yrityksen henkilöstön kanssa palavereja ja kokemuksiin perustuvia haastatteluja koskien CadMaticin käyttöä sekä mallintamalla SolidWorks ohjelmalla kappaleet, jotka olivat valmiiksi mallinnettu jo
CadMatic ohjelmalla.
Tuloksena toteutui SolidWorksilla mallinnetut kappaleet, joita vertailtiin CadMatic ohjelmalla mallinnettuihin kappaleisiin. Kappaleiden työvaiheita ja niihin kuluvaa aikaa vertailtiin keskenään. Tuloksena saatiin tiivis raportti arvioinneista, joista käy ilmi, että SolidWorksin käytön lisääminen yrityksessä olisi mahdollista sekä kannattavaa sillä se helpottaa tietyissä tilanteissa mallintamista.
The thesis examines the work steps of SolidWorks program and compares them with the steps of the CadMatic program. The thesis has been carried out by holding meetings with the company's personnel and interviews based on experience regarding the use of CadMatic and modelling pieces that were already modelled with CadMatic software with SolidWorks.
The result was SolidWorks modelled pieces, which were compared to pieces modelled on CadMatic. The work phases of the paragraphs and the time it takes to do so were compared. The result was a concise report of evaluations showing that increasing the use of SolidWorks in the company would be possible and profitable as it facilitates modelling in certain situations.