Esikokoonpanon visuaalisen tuotannonohjauksen kehittäminen
Mertanen, Teemu (2021)
Mertanen, Teemu
2021
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2021081717034
https://urn.fi/URN:NBN:fi:amk-2021081717034
Tiivistelmä
Tämän insinöörityön tarkoitus oli kehittää Kaivos- ja tunnelityökoneita valmistavan Normet Oy:n Iisalmen toimipisteen tuotannon esikokoonpanon visuaalista tuotannonohjausta. Tavoitteena oli saada tuotannonohjauksessa käytettävä työkalu, jonka avulla esikokoonpanon tuotannonohjaus ja valmistuksen seuranta helpottuisi.
Aloittaessa opinnäytetyötä esikokoonpanon tuotannonohjaus tapahtui suullisesti työnjohtajan ja esikokoonpanon työntekijöiden välillä. Työ aloitettiin tutkimalla ja kaavoittamalla lähtötilannetta, josta jatkettiin tutkimaan yrityksessä käytössä olleita tuotannonohjauksen työkaluja ja järjestelmiä. Työkalujen toiminnallisuutta esikokoonpanon toiminnanohjauksessa tutkittiin ja pisteytettiin eri kriteerien pohjalta. Työ toteutettiin yhteistyössä yrityksen työntekijöiden ja toimihenkilöiden kanssa.
Lopputuloksena saatiin yrityksessä jo olemassa olleista tuotannonohjausmenetelmistä esille paras ja huonoin mahdollinen vaihtoehto esikokoonpanon tuotannonohjaukseen. The purpose of this thesis was to develop the visual production control of the pre-assembly for
Normet Oy, a manufacturer of mining and tunneling machinery. The aim was to have a tool used in
production control, which would facilitate pre-assembly production control and monitoring.
In the beginning, the production control of the pre-assembly took place orally between
foreman and employees of the pre-assembly. The thesis began by examining and zoning the initial
situation, from which the investigation of the production control tools and systems used in the
company was continued. The functionality of the tools in pre-assembly was examined and scored
on the basis of various criteria. The thesis was made in cooperation with the workers and
clerks of the company.
As a result of this thesis the best and the worst possible alternatives to pre-assembly production control were found out for the company’s existing production control methods.
Aloittaessa opinnäytetyötä esikokoonpanon tuotannonohjaus tapahtui suullisesti työnjohtajan ja esikokoonpanon työntekijöiden välillä. Työ aloitettiin tutkimalla ja kaavoittamalla lähtötilannetta, josta jatkettiin tutkimaan yrityksessä käytössä olleita tuotannonohjauksen työkaluja ja järjestelmiä. Työkalujen toiminnallisuutta esikokoonpanon toiminnanohjauksessa tutkittiin ja pisteytettiin eri kriteerien pohjalta. Työ toteutettiin yhteistyössä yrityksen työntekijöiden ja toimihenkilöiden kanssa.
Lopputuloksena saatiin yrityksessä jo olemassa olleista tuotannonohjausmenetelmistä esille paras ja huonoin mahdollinen vaihtoehto esikokoonpanon tuotannonohjaukseen.
Normet Oy, a manufacturer of mining and tunneling machinery. The aim was to have a tool used in
production control, which would facilitate pre-assembly production control and monitoring.
In the beginning, the production control of the pre-assembly took place orally between
foreman and employees of the pre-assembly. The thesis began by examining and zoning the initial
situation, from which the investigation of the production control tools and systems used in the
company was continued. The functionality of the tools in pre-assembly was examined and scored
on the basis of various criteria. The thesis was made in cooperation with the workers and
clerks of the company.
As a result of this thesis the best and the worst possible alternatives to pre-assembly production control were found out for the company’s existing production control methods.